|
SILPRO FLOOR PREPARATION PRODUCTS
|
|
SKIM PRO
®
|
|
Silpro SkimPro
®
skim coat is a fast-setting, high performance, polymer-modified one component product for leveling and smoothing concrete, ceramic and quarry tile, terrazzo, wood, and water-insoluble cut-back adhesive prior to the installation of finished flooring like VCT, continuous vinyl flooring, or other standard flooring products. This Portland cement-based product mixes easily with water to produce a skim coat that is exceptionally easy to apply and does not require priming, Floor coverings can be installed in as little as 30 minutes, depending on type, thickness and drying conditions.
|
<< learn more >>
DOWNLOADS:
|
|
SILPRO PRIME PATCH
®
|
|
SILPRO PRIME PATCH
®
is a one component, fast-setting, polymer-modified, all-purpose Calcium Aluminate cement- based patching and skimming compound. Prime Patch
®
has been developed for the successful flooring contractor who is interested in meeting demanding schedules without compromising quality. As a superior patching and skimming compound for the use over concrete, tile, VCT, non-cushioned sheet vinyl, cement terrazzo, residual water-insoluble adhesive and cutback adhesive, and approved wooden substrates, Prime Patch
®
facilitates the same-day installation of floor coverings because of its ease of installation and short cure time of as little as 60 minutes.
|
<< learn more >>
DOWNLOADS:
|
|
FASCO
®
|
|
Silpro Fasco
®
, mixed with Silpro C-21 All Acrylic
®
admix, is a fast-setting, polymer-modified, Portland cement-based mortar. Fasco
™
has been developed for the successful flooring contractor who is interested in ways to meet demanding schedules without compromising on quality. As a superior patching, resurfacing, and leveling material for use over concrete and approved wooden substrates, Fasco
®
facilitates same-day installation of floor coverings because of its ease of installation and short cure time. Additionally, Fasco
®
provides a durable wear surface that can be used both indoors and outdoors, above or below grade, on horizontal and vertical surfaces, and can be applied down to a featheredge. Fasco
®
is available in a gray color that resembles poured concrete. Floor coverings can be installed in as little as 1 hour, depending on type, thickness and drying conditions.
|
<< learn more >>
DOWNLOADS:
|
|
PATCHCO
®
|
|
Silpro Patchco
®
is a one component, fast-setting, polymer modified, Calcium Aluminate cement-based mortar. Patchco
®
has been developed for the successful flooring contractor who is interested in meeting demanding schedules without compromising quality. As a superior patching, ramping, and leveling material for use over concrete, tile, and approved wooden substrates, Patchco
®
facilitates the same day installation of floor coverings because of it's ease of installation and short cure time of as little as 60 minutes.
|
<< learn more >>
DOWNLOADS:
|
|
FASTCRETE
®
|
|
Silpro Fastcrete
®
is a fast-setting, Portland cement-based, polymer-modified, fiber-reinforced, one component, structural repair and leveling mortar. Use Fastcrete
®
for interior and exterior restoration of deteriorated concrete elements and slabs. It may be placed into forms or used in horizontal applications. Fastcrete
®
may be used as an exposed industrial wear surface or as an underlayment for resilient, carpet, laminate, ceramic tile, and wood flooring. Floor coverings can be installed in as little as 1 hour, depending on type, thickness and drying conditions.
|
<< learn more >>
DOWNLOADS:
|
|
SILFLO® 220
|
|
Silpro Silflo
®
220 is a high performance, general-purpose, Calcium Aluminate cement-based, polymer-modified self-leveling underlayment. Silflo
®
220 is recommended for resurfacing and leveling interior concrete, wood, cement terrazzo, quarry, and ceramic tile floors prior to the installation of resilient flooring, ceramic tile, wood flooring, laminate, or carpet.
|
<< learn more >>
DOWNLOADS:
|
|
SILFLO®230
|
|
Silpro Silflo
®
230 is a fast-setting, high performance, multi-purpose, Calcium Aluminate cement-based, polymer-modified topping that can be used as a self-leveling underlayment or as an exposed wearing surface for interior applications. As an underlayment, it is recommended for resurfacing and leveling interior concrete, wood, cement terrazzo, quarry, and ceramic tile floors prior to the installation of resilient flooring, ceramic tile, wood flooring, laminate, or carpet. It is also an excellent light-to-moderate duty wearing surface when coated with an appropriate pigmented coating. Floor coverings can be installed in as little as 12 hours, depending on type, thickness and drying conditions.
|
<< learn more >>
DOWNLOADS:
|
|
MASCO
™
|
|
Silpro Masco
™
is a polymer-modified, Portland cement-based mortar used for patching, resurfacing, and leveling floors. It can serve as a wearing surface or as an underlayment for carpet, tile, wood, sheet goods, athletic surfaces, etc. The specially formulated Masco powder is mixed on the job with Silpro C-21 All Acrylic
®
admix. Masco
™
provides a tough, resilient surface that is highly resistant to abrasion and impact, and can withstand extreme fluctuations of temperature. Use it indoors our outdoors, above or below grade, on both horizontal and vertical surfaces, and in areas that may become totally submerged.
|
<< learn more >>
DOWNLOADS:
|
|
MASCO
™
MESH
|
|
Silpro Masco
™
Mesh is a high performance, alkali resistant, fiberglass reinforcing mesh used for use in the Silpro Masco
™
Mesh System. When used in conjuntion with Silpro's polymer modified underlayments, Masco
™
Mesh can be used to bridge cracks, stabilize cinder ash screed construction.
|
<< learn more >>
DOWNLOADS:
|
|
MASCO
™
MESH SYSTEM
|
|
Silpro Masco
™
Mesh System is a high performance, polymer-modified, fiberglass mesh reindforced, Calcium Aluminate cemenet-based substrate repair system designed to go over existing damaged or cracked concrete, cement screed, cinder fill, and gypsum substrates. This system creates a new substrate for the installation of floor coverings.
|
<< learn more >>
DOWNLOADS:
|
|
CALCRETE
™
|
|
Silpro Calcrete
™
All-Purpose Patch is a Portland cement-based, polymer-modified, mortar proven in service over 25 years to be a superior underlayment, patching, and surfacing material. Calcrete
™
may be used indoors, outdoors, above and below grade. After curing it is unaffected by wide temperature changes or standing water, and maintains its bond strength through years of freeze/thaw cycles. Calcrete
™
bonds readily to concrete, wood, brick, patio block, etc.
|
DOWNLOADS:
|
|
MASCRETE
®
|
|
Silpro Mascrete
®
is a polymer-modified, Portland cement-based mortar used for patching, resurfacing, and leveling floors, or as an underlayment for any floor covering. Mascrete
®
can be applied in thicknesses ranging from 1/8” to ¾” when mixed right from the bag (neat), or from ¾” to 3” when extended with 40# - 80# of clean, washed and drained, 3/8” crushed stone. The specially formulated Mascrete
®
powder is mixed on the job with Silpro C-21 All Acrylic
®
admix. Mascrete
®
provides a tough, resilient surface that is highly resistant to abrasion and impact, and can withstand extreme fluctuations of temperature. Use it indoors or outdoors, above or below grade, and in areas that may become totally submerged.
|
<< learn more >>
DOWNLOADS:
|
|
C-21 ALL ACRYLIC
®
|
|
Silpro C-21 All Acrylic
®
is a 100% acrylic latex that can be used as an admix/internal bonding agent or primer. C-21 All Acrylic
®
is a water-based cement modifier admix/internal bonding agent that enhances the performance properties of cementitious mortars and coatings. And when you add it to the mix, it forms a plastic matrix, or film, that helps retain water and promotes cement hydration, resulting in improved compression (crushing) strength without wet curing. It gives Portland cement and gypsum mixes greatly improved tensile and flexural strength, flexibility, and maximum adhesion to old or new concrete surfaces for patching, grouting, or coating. C-21 All Acrylic
®
increases the abrasion, chemical, and water resistance of these mixes making them ideal for application on floors, ramps, sidewalks, masonry walls, etc. It is classified as a non-reemulsifiable bonding admixture. C-21 All Acrylic
®
is an essential component of Silpro Masco
™
, Fasco
®
,
and Mascrete
®
. It may also be used in Silpro California Stucco
™
, Concrete Finish
™
, Seal Cote
®
and Easy Patch
™
. Please see individual product data sheets.
|
<< learn more >>
DOWNLOADS:
|
|
SILFLO®PRIMER
|
|
Silpro Silflo
®
Primer is designed to bond Silpro Silflo
®
Self-Levelers to various interior substrates such as concrete, wood, ceramic tile, cement terrazzo, etc.
|
<< learn more >>
DOWNLOADS:
|
|
MASONRY LUSTA PLUS
®
|
|
Silpro Masonry Lusta Plus
®
is a clear acrylic solvent-based liquid sealer for use on brick, slate, granite, limestone, bluestone, pavers, terrazzo, masonry, concrete, and exposed aggregate surfaces. It brings out the natural brilliance and color of materials used in patios, chimneys, and fireplaces, floor slabs, etc. Masonry Lusta Plus
®
seals mortar and masonry grout against water and stains, eliminating powdering of the mortar joints, and makes cleaning quicker and easier. Masonry Lusta Plus
®
is unaffected by weak acids, salts, and many chemicals, and does not yellow or discolor. It can also be touched up or recoated.
|
<< learn more >>
DOWNLOADS:
|
|
VAPOR HALT
™
125
|
|
Silpro Vapor Halt
™
125is a high performance, two component, low viscosity, moisture tolerant, solvent free, epoxy based product that reduces the passage of water vapor and moisture through concrete slabs on or below grade. By controlling the passage of water vapor through concrete, Vapor Halt ™ 125 effectively eliminates delamination and degradation of adhesives, floor coverings, and floor coatings.
|
DOWNLOADS:
|
|
|
SILPRO CONCRETE REPAIR & MASONRY PRODUCTS
|
|
FSB
®
FIBERGLASS SURFACE BONDING CEMENT
|
|
Silpro FSB
®
is a polymer-modified, Portland cement-based trowel-applied high performance surface bonding cement containing sized aggregates, fiberglass reinforcing fibers, and an integral waterproofing agent.
|
<< learn more >>
DOWNLOADS:
|
|
SILPROPAVER™ SAND
|
|
SilproPaver™ Sand is a proprietary mixture comprising polymers, sand, and various other components to produce a unique sand for use in filling the joints on driveways, patios, pool decks and walkways.
|
<< learn more >>
DOWNLOADS:
|
|
CONCRETE FINISH
™
|
|
Silpro Concrete Finish
™
is a trowel-applied, Portland cement-based coating specifically designed to protect and decorate concrete and masonry surfaces. It gives an attractive, durable, water-resistant finish to brick or block walls. Concrete Finish
™
covers color and texture variations in poured concrete with a uniform finish eliminating the need for costly rubbing. Available in gray or white. White Concrete Finish
™
can be integrally colored with Silpro Hawk & Trowel Pigment, available in 7 earth-tone shades.
|
<< learn more >>
DOWNLOADS:
|
|
CALIFORNIA STUCCO
™
|
|
Silpro California Stucco
™
is a Portland cement-based, water-resistant coating that is easy to apply and has the ability to withstand severe climatic conditions. It combines a great variety of textures with low maintenance cost in a permanent finish material. Available in white or gray. White California Stucco
™
can be integrally colored with Silpro Hawk & Trowel Pigment available in 7 earth-tone shades.
|
<< learn more >>
DOWNLOADS:
|
|
SEAL COTE
™
|
|
Silpro Seal Cote
™
is a Portland cement-based coating used to waterproof, protect, and decorate new and old concrete and masonry. Brush it on vertical concrete and masonry interior or exterior surfaces, above or below grade. Available in gray or white.
|
<< learn more >>
DOWNLOADS:
|
|
SILPROFINISH™ COTE
|
|
SilproFinish™ Cote is a Portland cement-based, polymer-modified
coating that contains specially graded aggregates to
provide a desired wall finish in conjunction with an effortless
application. SilproFinish™ Cote is used for finishing a variety
of concrete surfaces such as tilt-up walls, poured concrete,
precast concrete and masonry on both interior and exterior
applications. SilproFinish™ Cote provides an aesthetically
pleasing gray appearance.
|
<< learn more >>
DOWNLOADS:
|
|
EASY PATCH
™
|
|
Silpro Easy Patch
™
is a rapid-setting, low shrinkage, Portland cement-based repair mortar. Use it for patching and repairing concrete indoors or outdoors, above or below grade, without using forms. A 2” deep patch can be walked on in 4-6 hours and driven over in 10-20 hours. Use Easy Patch
™
for restoring damaged concrete where the molding and shaping of the finished surface is important. It can be carved and shaped as it hardens.
|
<< learn more >>
DOWNLOADS:
|
|
VO PATCH
®
|
|
Silpro VO Patch
®
is a one-component, Portland cement-based material used to restore and repair vertical and overhead concrete and masonry surfaces. Its fast set and density allow VO Patch
®
to be placed and sculpted to proper shape in one application for thicknesses up to 2 inches. VO Patch
®
is polymer-modified to produce a superior bond, and improved tensile and flexural strength.
|
<< learn more >>
DOWNLOADS:
|
|
EASY PLUG
™
|
|
Silpro Easy Plug
™
Hydraulic Cement is a cementitious material formulated to set rapidly (3 to 5 minutes) to patch cracks and holes. It is particularly effective in stopping the flow of water permanently. Use it indoors or outdoors, above or below grade.
|
<< learn more >>
DOWNLOADS:
|
|
|
C-21 ALL ACRYLIC
®
|
|
Silpro C-21 All Acrylic
®
is a 100% acrylic latex that can be used as an admix/internal bonding agent or primer. C-21 All Acrylic
®
is a water-based cement modifier admix/internal bonding agent that enhances the performance properties of cementitious mortars and coatings. And when you add it to the mix, it forms a plastic matrix, or film, that helps retain water and promotes cement hydration, resulting in improved compression (crushing) strength without wet curing. It gives Portland cement and gypsum mixes greatly improved tensile and flexural strength, flexibility, and maximum adhesion to old or new concrete surfaces for patching, grouting, or coating. C-21 All Acrylic
®
increases the abrasion, chemical, and water resistance of these mixes making them ideal for application on floors, ramps, sidewalks, masonry walls, etc. It is classified as a non-reemulsifiable bonding admixture. C-21 All Acrylic
®
is an essential component of Silpro Masco
™
, Fasco
®
and Mascrete
®
. It may also be used in Silpro California Stucco
™
, Concrete Finish
™
, Seal Cote
®
and Easy Patch
™
. Please see individual product data sheets.
|
<< learn more >>
DOWNLOADS:
|
|
WELD-O-BOND
™
|
|
Silpro Weld-O-Bond
™
Bonding Coat is specifically formulated for bonding Portland cement mixes to interior or exterior concrete or masonry surfaces and gypsum mixes to interior concrete, masonry, or plaster surfaces. Use Weld-O-Bond
™
to bond Silpro Concrete Finish
™
, California Stucco
™
, Easy Patch
™
or VO Patch
®
to concrete or masonry walls.
|
<< learn more >>
DOWNLOADS:
|
|
SILOCKS PLUS
®
|
|
Silpro Silocks Plus
®
is a clear, solvent-based, deep penetrating, combination siloxane/silane breathable water-repellent treatment for all types of concrete and mansonry surfaces. Its penetrating ingredients are ultraviolet light resistant and will not discolor surfaces.
|
<< learn more >>
DOWNLOADS:
|
|
SILOCKS PLUS WB
®
|
|
Silpro Silocks Plus® WB
®
is a clear, water-based, deep penetrating, alkoxysilane breathable water-repellent for all types of
concrete, masonry, and other cement-based surfaces. Its penetrating ingredients are ultraviolet light resistant and will
not discolor surfaces. Due to its low VOC content, Silpro Silocks Plus® WB has low odor and is suitable for both interior
and exterior use.
|
<< learn more >>
DOWNLOADS:
|
|
|
MASONRY LUSTA PLUS
®
|
|
Silpro Masonry Lusta Plus
®
is a clear acrylic solvent-based liquid sealer for use on brick, slate, granite, limestone, bluestone, pavers, terrazzo, masonry, concrete, and exposed aggregate surfaces. It brings out the natural brilliance and color of materials used in patios, chimneys, fireplaces, floor slabs, etc. Masonsry Lusta Plus
®
seals mortar and masonry grout against water and stains, eliminating powdering of the mortar joints, and makes cleaning quicker and easier. Masonry Lusta Plus
®
is unaffected by weak acids, salts, and many chemicals, and does not yellow or discolor. It can also be touched up or recoated.
|
DOWNLOADS:
|
|
